EAS

EAS Pressure Sensor - 0-100 psig

Compatible w/ Edge CS2/CTS2/CTS3 - 1/8 in. NPT

Part # 98607

10 Reviews

Estimated Ship Date: 05/23/2025

Free Shipping*

$182.95

Add to Wishlist

The EAS Pressure Sensor is a 0 - 100 PSIg 1/8 NPT sensor that plugs directly into the Universal Sensor Input system (p/n 98605). The Pressure Sensor comes equipped with the proper wires and connectors to plug right into the Universal Sensor Input system saving time and money on cutting, splicing, and crimping wire terminals to connect the sensor. Use the Pressure Sensor to monitor data such as Boost PSI, Fuel Rail Pressure, Air Bag Pressure, Lift Pump Pressure, Pre and Post Intercooler Pressure and many more.

Features:

Monitor pressures on your vehicle
0-100 psi capable
Easy setup through EAS
Requires EAS universal Sensor Input kit to connect to device (p/n 98605) not included
Compatible with CTS2/CTS3

Brand	EAS
Category	Tuners and Programmers
Color Display	Yes
Connector Gender	Female
	Male
Emission Code	6
Grade Type	Performance
Product Type	Cables and Adapters
Thread Size	1/8 NPT
Universal Or Specific Fit	Universal
UPC	810115011231
Part Number	98607

Instructions - D10028500_Rev01.pdf

Reviews

3.1 out of 5 stars

5 star
40%
4 star
10%
3 star
10%
2 star
0%
1 star
40%

Your Review

Title

Review

Page:

Eas boost sensor

By Baking83 on October 5, 2017

This thing is junk 164.00 waste of money nowhere in the description states you need to Eas adapter says plugs right into your cts so you have to spend another 152.00 for the 3 wire plug/adapter. I will never buy a edge product again almost 1000 dollars in and I'll I can read is egt

Great solution to for sensors!

By kock on September 19, 2017

I bought this for my 2005 ram 3500 12v swapped cummins and they are just a dream to use and set up.

It works good.

By Jacob on July 3, 2017

I bought to read fuel pressure and received a sensor that was " dry air only" called and was offered a replacement, but I needed it to work sooner than I could wait. I already had one of the same sensor I was using for turbo boost. So I switched them out and it worked perfectly. Only problem I have is you have to plug up a computer every time you add or change something to make it recognize the new sensor, other than that it works great

Great addition to CTS2

By Rams on January 19, 2018

Simple and easy to use. The Edge products are awesome and wish I learned about them sooner. This device allows me to monitor my fuel pressure at my regulated return. Highly recommended for modified trucks

Manifold Pressure

By Greg O on December 7, 2020

pressure sensor functions accurately the majority of the time but will indicate pressure intermittently even after the engine is not running. I purchased this so I could monitor actual manifold pressure and not what the ECU was reading. They are very close

Excellent add on!

By Michael L on December 9, 2020

This is the perfect sensor to read my boost beyond the factory limit. The factory cut out at 22 and this one easily goes beyond! Only wish I could make it read only while values. I also put one in for my lift pump pressure. Excellent add on!

Failed in a week

By Aner0nix on December 22, 2019

I’ve added this sensor to my edge for my new air dog setup. It worked great for about a week. Then it would stop and randomly start from time to time. Ive run without a pressure readout for a year now not knowing the sensor was for dry air only. Do not get this if your planning to use it for what it’s intended for.

Junk

By OregonTk on February 18, 2021

Payed way to much for my cts3 then had to buy all the adapters The universal pressure sensor is wrong for lift pump iv called 2 times they sent me the same sensor as the one that don’t work iv adjusted everything still don’t work and no instructions at all.

By tonolopez19.ji on May 17, 2021

Dry air application only

By William S on February 3, 2018

Bought it to monitor fuel pressure. Received it and it says for Dry Air Application Only. This is not stated anywhere on the website. The box for it even says it can be used for fuel rail pressure and lift pump pressure, but the sensor itself says Dry Air Only. So frustrating!!! Bought the sensor and the universal input, but now I can’t use either of them! Also, the sensor is only good for 0-50 psia.

Page:

*Free Shipping & Handling only offered to the contiguous US on orders over $149, excludes clearance parts and oversized packages.

Some parts are not legal for use in California or other states with similar regulations.

EAS Pressure Sensor - 0-100 psig

EAS Pressure Sensor - 0-100 psig

Also Bought

Features:

Be the first to write a review

3.1 out of 5 stars

Your Review