2019 GMC, Chevrolet, and Ford Gas Insight Update Coverage Release

Insight CS2 (PN 84030), and Insight CTS2 (PN 84130) now supports 2019 Ford 2.7L, 3.3L, 3.5L, and 5.0L engines and 2019 Chevy/GMC 6.2L trucks. Edge’s crowd-favorite Insight is packed full of options to monitor, log, and test your new truck. You can observe and understand vehicle parameters using Edge’s state-of-the-art technology.

2019 GMC/Chevy 1500 6.2L Parameter List:

Active Cylinders, Acceleration Pedal Position, Air Flow (Calculated), Ambient Air Temp, Barometric Pressure, Battery Voltage, Cycles of Misfire Data, Desired Idle RPM, Desired Throttle Position, Engine Coolant Temp, Engine Load, Engine Oil Pressure, Engine Oil Temperature, Engine RPM, Engine Run Time, Fuel Remaining in %, Fuel Pressure, G Force, G Force Calculated, G Force Lateral, Current Gear w/ TCL Status, Horse Power, Intake Air Temp at Manifold, Lambda, Long Term Fuel Bank 1, Long Term Fuel Bank 2, Open/Closed Loop Status, Manifold Absolute Pressure, Mass Air Flow, Mileage Avg., Mileage Coach, Mileage Inst., O2 Sensor Voltage (Bank 1 Sensor 1), O2 Sensor Voltage (Bank 1 Sensor 2), O2 Sensor Voltage (Bank 2 Sensor 1), O2 Sensor Voltage (Bank 2 Sensor 2), Percent Grade, Power Enrichment Mode Status, Run Time, Short Term Fuel Bank 1, Short Term Fuel Bank 2, Spark Retard from Knock, Spark Retard from Torque Management, TCC Line Pressure, TCC Slip Speed, Time 0 to 60, Time Quarter Mile, Timing Advance, Torque, Total Misfires, Transmission Fluid Temp, Trip Odometer, Vehicle Speed

Note: The 2019 GM 6.2L gas new body style has a new fuel economy feature called Dynamic Fuel Management (DFM). This replaces the Displacement on Demand/Active Fuel Management system of previous years. Now, when the truck is cruising at light loads, up to seven cylinders can be disabled such that the engine could just be running on one cylinder. If the DFM system is not engaged, it will show 8 cylinders active. If it is engaged, it will show anywhere between 1 to 7 cylinders active. Typically the cylinders will “count down” from 8 to its desired value because the DFM system only seems to disable one or two at a time in sequence.

2019 Ford F-150 2.7L, 3.3L, 3.5L, and 5.0L Parameter List:

Cylinder Head Temp, Vehicle Speed, Accel Pedal Position, Battery Voltage, Loop Status, Intake Air Temp, Engine Load, Engine RPM, Spark Advance, Knock Sensor 1, Knock Sensor 2, Fuel Remaining, TCC Solenoid Pressure, Manifold Abs Pressure, Engine Coolant Temp, Mileage Inst., Mileage Avg., Mileage Coach, Run Time, Trip Odometer, G Force Lateral, G Force Calculated, Percent Grade, Horse Power, Torque, G Force