|
|
 |
|
| |
| Viewing products in Product Accessories |
|
Replacement thermocouple (EGT probe) fits all Juice with Attitude kits. |
|
|
|
For those diesel customers not interested in future expandability and optional future accessories Edge offers a simple, inexpensive non-expandable EGT sensor that allows users to monitor critical exhaust gas temperatures to ensure added power is not creating excessive heat which in turn can cause engine damage. |
|
|
|
The EGT probe is a sensor that allows users to monitor critical Exhaust Gas Temperatures to ensure added power is not creating excessive heat which, in turn, can cause engine damage. With the EAS system a user can connect multiple EGT sensors to monitor temperatures in different locations and compare readings to be even more precise.
*EAS Starter Kits are only available to work with the CS and CTS product lines. In order to use the EAS accessories you must have an EAS Starter kit (part # 98602). EAS Starter kits come with all Juice w/ Attitude CS and CTS products and the EAS Starter Kit w/ Expandable EGT (part # 98603).
|
|
|
|
Edge back-up camera: The CTS line of products have a built-in video port that allows users to connect Edge’s new state-of-the-art back-up camera. The CTS’s high-resolution, 4.3 inch color screen allows users to see what’s going on behind them with the Edge camera connected. The camera mode on the CTS automatically engages when the vehicle goes into reverse*. The back-up camera option is a must have for towers and safety-conscious drivers.
*Camera automatically engages on supported vehicles with automatic transmission where we can read the gear parameter. Not available on all models.
**CTS monitor not included with purchase of camera.
|
|
|
|
Diesel Legacy Evolution/Insight thermocouple probe that connects to the sensor port on the OBDII connection and display EGT (Exhaust Gas Temperature). (This does not work on the CS and CTS) |
|
|
|
Edge offers a wide variety of custom dash mounts for various vehicle makes and models. This adaptor allows the CTS to fit in these custom dash mounts. |
|
|
|
TURBO TIMER
A turbo timer is a device designed to keep an engine running for a pre-specified period of time or a until a specific temperature is reached in order to automatically execute the cool-down period required to prevent premature turbo wear and failure. This also allows the lubricating oil from the engine to circulate properly so the turbine won't burn the lubricating oil that would otherwise be trapped within the charger with the turbine rotating at high speed.
*Turbo timers are only available to work with the CS and CTS product lines. In order to use the turbo timer you must have an EAS Starter kit (part # 98602). EAS Starter kits come with all Juice w/ Attitude CS and CTS products and the EAS Starter Kit w/ Expandable EGT (part # 98603). |
|
|
|
EAS Starter Kit
The Edge Accessory System (EAS) was created with future expandability in mind. The architecture of the EAS allows users to connect multiple accessories, daisy-chain style, to the CS and CTS platform. The ability to daisy-chain multiple accessories using the EAS allows users to monitor and display dozens of parameters on a single device.
*EAS Starter Kits are only available to work with the CS and CTS product lines. In order to use the EAS accessories you must have an EAS Starter kit (part # 98602). EAS Starter kits come with all Juice w/ Attitude CS and CTS products and the EAS Starter Kit w/ Expandable EGT (part # 98603).
|
|
|
|
The EAS Universal Sensor Input provides the ability to read any 0-5 volt signal and translate that signal a meaningful value for display on the Edge CS or CTS. This means you can add custom temperature, pressure, Air/Fuel and even Travel/Position gauges to your Edge CS and CTS! |
|
|
|
Edge’s EAS Pressure Sensor is a 0 - 100 PSIg 1/8” NPT sensor that plugs directly into the Universal Sensor Input system (p/n 98605). Edge’s Pressure Sensor comes equipped with the proper wires and connectors to plug right into the Universal Sensor Input system saving time and money on cutting, splicing, and crimping wire terminals to connect the sensor. Use Edge’s Pressure Sensor to monitor data such as Boost PSI, Fuel Rail Pressure, Air Bag Pressure, Lift Pump Pressure, Pre and Post Intercooler Pressure and many more.
Tolerance: +-1.5% Full Span over temperature range of -20C to 85C and +-2.4% Full Span over temperature range of -40C to 135C.
|
|
|
|
The EAS Temperature Sensor is a -40°F to 300°F 1/8” NPT supplied with the connectors to plug directly into Edge’s Universal Sensor Input System. Using Edge’s Temperature Sensor you can monitor Transmission Temp., Differential/Axle Oil Temp., Oil Temp., Engine Coolant Temp., Air Intake Temp., Pre and Post Intercooler Temp., and many more. Use this in conjunction with the Universal Sensor Input and the CS or CTS monitor to allow you to view critical temperatures with the most state-of-the-art product on the market today. |
|
|
|
If your vehicle is not equipped with an outside temperature sensor then this is a must have! The EAS Ambient Temperature Sensor is a -40°F to 230°F Waterproof 0.2” diameter sensor ready to plug into Edge’s Universal Sensor Input system. Now you’ll never wonder what outside air temperature is again! |
|
|
|
Universal 2-1/16” Gauge Pillar Adapter for the CS/CTS products. This adapter allows you to mount the CS or CTS products in a 2-1/16” Gauge Pillar Pod. The adapter’s state-of-the-art swivel system, gives you the flexibility to adjust the monitor to your own optimal viewing angle. |
|
|
|
|
|
|
Edge Products | 1080 S. Depot Dr. | Ogden, UT 84404| 1-888-360-3343 or 1-801-476-3343 | Mon-Fri 8 a.m. - 5 p.m. (MST)
